| System Specifications |
| Part Number |
PWK1-24-FC1 |
| Frequency Range |
2400 - 2500 MHz |
| Transmit Power |
Effective EIRP = 36dBm |
| Operating Temperature |
-40F (-40C) to 140F (60C)
|
Power Options
|
48VDC Power Over Ethernet (POE) or External power adaptors
(POE power supports non 802.3af/at compliant injector)
|
| Dimensions |
Board dimensions: W: 7.5” (191 mm), L: 11.5” (293mm)
Overall dimensions: W: 7.5” (191 mm), L: 11.5” (293mm), H: 5.5” (140mm) |
| Weight |
5.88 lbs (2.67Kg) |
| Color |
Board: Smoked/Plex; Signal Booster: White powder coated aluminum;
AP: Blue powder coated steel |
| Mounting |
Utility room wall, Attic |
Application
|
For extending signal range and data throughput in home and small office environments where obstructions may traditionally limit signal coverage |
Coverage Area
|
10,000 square feet (929 square meters) or more*
|
| Shock-WAV Signal Booster Specifications |
| WI-FI Booster Technology |
Shock-WAV 1W
|
Transmit Gain
|
System has enough gain to reach maximum transmit power with a radio input as low as +10dBm (20dB Typical, under AGC Control) |
| Receive Gain |
18dB Typical |
Noise Figure
|
3.5dB Typical
|
| X-WAV Antenna Specifications |
| Gain |
7dBi |
| Polarization |
Right Hand Circular |
| Azimuth Beam Width |
70 degrees
|
| Elevation Beam Width |
70 degrees
|
| VSWR |
< 1.5:1 |
| Impedence |
50 Ohm |
For more specifications and system requirements visit www.luxulwireless.com/products
|
| D-Link DWL-2100AP Specifications |
| Part Number |
DWL-2100AP |
| IEEE Standard |
802.11b/g |
| Dimensions |
W: 4.3 inches (109mm), L: 5.6 inches (142mm), H: 1.2 inches (31mm) |
| Weight |
0.44 lbs (.2Kg) |
| For more specifications and system requirements visit www.dlink.com |
